Pressure rating is not a standalone valve selection field. A reliable valve specification considers the applicable standard, body material, service temperature, connection type, medium and operating duty together. Providing this information at RFQ stage helps prevent an unsuitable pressure class or flange mismatch.
1. PN, Class and working pressure
PN designation
PN is commonly used in metric valve and flange standards. The applicable standard and service temperature still need confirmation.
Class designation
Class ratings are used in other standard systems and must be matched to the correct flange, material and pressure-temperature table.
Working pressure
The actual maximum operating and surge pressure of the line should be stated, not only a nominal project reference.
2. Temperature changes the selection
Material strength, seals and seats may behave differently across the operating temperature range. Include normal, minimum and maximum temperature as well as any cleaning, steam-out, start-up or upset condition. For cryogenic, high-temperature or corrosive service, the material and sealing selection requires additional review.
3. Connection and system details
| RFQ input | Why it matters |
|---|---|
| Flange or connection standard | Ensures matching dimensions, drilling and face requirements. |
| Medium and solids content | Supports body, trim, disc, seat and seal selection. |
| Pressure and temperature range | Allows review against the selected valve material and service duty. |
| Valve function | Isolation, regulating, non-return or emergency duty can change the required design. |
| Actuation requirement | Electric or pneumatic actuation requires torque, signal, supply and fail-action data. |
4. Pressure rating RFQ checklist
- Valve type, nominal size and quantity
- Applicable PN or Class requirement and connection/flange standard
- Maximum operating pressure, design pressure and any pressure surge information
- Minimum and maximum operating temperature
- Medium, material requirements and operating function
- Requested test, drawing, certificate and delivery requirements
Need help reviewing a valve pressure requirement?
Use the industrial valve RFQ checklist, review valve material selection, or send your datasheet for technical confirmation.
Request a technical quotation