Jinkon Valve · Technical guide

Valve Flange Types & Standards

Specify the right connection data to avoid flange mismatch in industrial, marine and process piping projects.

Flange compatibility requires more than matching the nominal pipe size. A valve and its mating flange must be reviewed for the relevant standard, pressure designation, drilling pattern, face arrangement, dimensions and material requirements. This is especially important when replacing an existing valve or combining equipment from different projects or regions.

Before ordering: send the flange standard, nominal size, pressure rating, face type and a drawing or photo of the mating connection whenever possible.

1. Common valve connection forms

Flanged valves

Suitable where bolted pipe joints are required. Confirm the exact flange standard, drilling and face requirements.

Wafer and lug valves

Common compact butterfly-valve configurations installed between flanges. Confirm line standard, bolt arrangement and installation duty.

Threaded, welded or other ends

These connections require their own standard, dimensions and material compatibility checks.

2. Information that must match

Connection detailWhy it matters
Nominal sizeSets the basic pipe and valve size but does not alone establish interchangeability.
Applicable flange standardDefines relevant dimensions, drilling and facing requirements.
Pressure designationMust correspond with the selected standard, material and pressure-temperature requirement.
Flange face and gasket arrangementMust be suitable for the joint type and project sealing requirement.
Existing dimensions or drawingHelps verify face-to-face, bolt clearance, installation space and replacement feasibility.

3. Replacement valve checklist

For an existing valve replacement, share nameplate photos, the old valve drawing or dimensions, pipe standard, service medium, pressure and temperature. For butterfly valves, include whether the installation requires wafer, lug, double-flanged or another configuration. Do not assume the same nominal size guarantees a direct replacement.

4. Flange RFQ checklist

Need to match a valve to an existing flange?

Review the valve pressure rating guide, use the industrial valve RFQ checklist, or send your drawing for review.

Request a technical quotation